This modular apparatus can control and distribute high pressure scuba air from your compressor to and from storage cylinders as well as into scuba tanks as required. Rated for 5,000 psi service, it consists of a heavy brass manifold bar containing three ball valves to control and direct air flow. Ball valves require no directional flow; thus they can control air-flow into our out of an air storage bank without being damaged. Therefore, this unit can control air from three individual storage tanks or three clusters of tanks! Each valve is equipped with a 5,000 psi gauge that reads the available pressure in that particular storage tank or cluster. Ball valves provide good throttling action and permit easy filling of single or multiple scuba tanks. A 4.0" master gauge on the module monitors line and bank pressure during recharging and tank pressure when filling scuba units. All ports on the manifold bar are 1/4" NPT female, including five outlets, four of which are plugged but can be reopened as needed to attach whips or other lines. The module comes with a stainless mounting bracket, so one only needs to mount the assembly and attach incoming lines and outgoing filler whips, which are sold separately. SPECIAL NOTES: CARE MUST BE EXERCISED WHEN OPERATING THIS APPARATUS WITH BANKS / CLUSTERS WITH DISSIMILAR SERVICE PRESSURES, SO THAT CROSS-PRESSURIZATION TO UNSAFE LEVELS DOES NOT OCCUR. ALSO, THIS UNIT IS NOT SUITABLE FOR NITROX ABOVE 40% OR OXYGEN SERVICE.
Working Pressure: 5,000 psi
3 - 1/4 NPT female input connections
5 - 1/4 NPT female connections