Products 1-8 of 8
Show
Availability: Active
Item #: 44135 -
For #44130 & #44160 or other applicances requiring a sludge drain. Valve with 1/4" NPTM inlet and six feet of plastic tube to run to a collection vessel or other depository.
Availability: Active
Item #: 46340 -
Made of anodized aluminum and stainless for 7,000 psi service. 1/4" NPTM inlet. Can be calibrated from 400 to 6,500 psi. Slow, gentle activation mechanism quickly reduces pressure during frequent, repeated openings. Reseats to an airtight status. Used as an "active" safety valve during compressing or tank filling operations. Comes uncalibrated with instructions.
Availability: Active
Item #: 46322 -
Adjustable "pop-off" valve which can be calibrated from 300 to 5,500 psi. Nickel plated brass for 6,000 psi service. 1/4" male NPT inlet. Used to protect filters, separators, storage vessels or compressor inter-stages. Comes uncalibrated with instructions. Order #46322OX for O2/Nitrox Version.
Availability: Active
Item #: 46150 -
Prudent dive shops strive to maintain a low dew point in their scuba air and also achieve maximum life expectancy from expensive filter cartridges. However, air must be 99% dry before entering the chemical filters or neither objective will be met! To accomplish this, an after-separator and a priority valve are required. The latter unit is an adjustable check valve which holds about 1700 psi of back-pressure on the filter system at all times. This raises the density of the air, increases the...
Availability: Active
Item #: 46320 -
Adjustable "pop-off" valve which can be calibrated from 300 to 5,500 psi. Anodized aluminum for 6,000 psi service. 1/4" NPTM inlet. Used to protect filters, separators, storage vessels or compressor interstages. Comes uncalibrated with instructions. Additional Info: These special valves are used to protect pressure-sensitive components or to relieve pressure at some prescribed level in compressed air systems. Standard relief valves are designed for sudden, intermittent, and sporadic service,...