A quick and easy upgrade to turn your 42020 tank draining stand into a tank washer. Mounts easily with 4 stainless steel bolts. Firmly grabs the tank stand with 4 vinyl coated clamps. Tank draining stand not included.

A 3-foot aluminum rod which screws onto the tank whip and lengthens it to about 70".

Not all Teflon tape is oxy-compatible. Global tape meets military specs for the manufacture and composition of oxy-safe material. A special 1/4" wide version for use on the 1/4" NPT fittings so common in scuba air stations.

A mini-pliers with a very sharp cutting edge; cuts plastic tie wraps so cleanly that no sharp edges remain to scratch or nick a diver's face! Also handy for removing old straps.

A fine, sand like abrasive grit which speeds the cleaning activity of normal media in STEEL tanks and usually shortens the tumbling process by several hours. Also enhances the cleaning of very dirty tanks with pitted or concreted walls. Requires only 2-3 teaspoons of grit per tumble. Sold by the pound.

This handsome 110v, rectangular shaped unit is 6.9" x 6.4" x 9" overall with a 2 Qt. Tank measuring 5.9" x 5.4" x 4". The tank of the Q-90 will easily hold large valve or regulator bodies. It develops 160 watts of cleaning power and has an automatic timer and pilot light. Additional Info: Perhaps the most effective way to clean small parts including those from scuba regulators / valves is by ultrasonics. This requires a special machine which generates high-frequency vibrations (beyond the...

This extra strong mold is ideal for shops and dive clubs. Makes 1 to 5 lb. weights. NO HANDLE.

An improved version of our #43270 Deluxe Regulator Tester, this device will attach to virtually ALL common BC (and alternate regulator/inflator) hoses, allowing the technician to sample the regulator's staging (intermediate) pressure (IP). A quick coupler on the bottom of the unit provides interchangeability for three adapters, each of which unites with a different type of BC hose. Simply select the matching adapter for the particular BC hose, snap it onto the Tester, attach the BC hose, and...

Cast aluminum mold with a 6" handle and bosses for easy removal of finished weights. Makes weights from 1 to 5 lbs

An internally threaded, 2" diameter cylinder of hi-tensile, anodized aluminum; the inner threads are 3/4-14 NPS which will accept the standard, O-ring sealed scuba valve. A 3-foot (5,000 psi service) hose attached to the base of the stand has a scuba yoke on its free end for attachment to any tank. To test a valve, screw it into the cylinder, turn on the air, and submerge the cylinder / valve in water. Any leaks will be apparent, and all valve functions can be tested with or without an...

Machined from hi-strength aluminum alloy, this 2"-diameter, anodized cylinder is drilled and tapped to accept O-ring sealed scuba valves (3/4-14 NPS). The bottom has a 1/4" FNPT air inlet port and two 1/4-20 bolt holes for mounting it to any bench top. Used to test repaired valves or, with an installed valve, makes a great bench top workstation for fixing/testing regulators!

The on/off handle and J-valve arm on virtually all scuba tank valves are retained by a special slotted nut. #43360 is a large, wide-blade screw-driver with a notched tip for removing that nut. Even nuts frozen by salt water can be freed with this tool.