This metric fitting conforms to DIN 2353 and is an adapter used on Komptec Compressors and other European devices. It easily converts the metric fitting to a more common American JIC. Working Pressure: 5,000 psi. Steel.

Converts a #4 JIC female swivel cap to 1/4 NPT female. Steel. Working Pressure: 5,000 psi. Old part #47085.

Converts a hose with a # 4 JIC male to 1/4" NPT female. Steel. Working Pressure: 5,000 psi. Old part #47190.

Converts a hose with a # 4 JIC male to 1/4" NPT male. Steel. Working Pressure: 5,000 psi. Old part #47170.

Standard connector sleeve with two 1/4 NPT female. Working Pressure: 6,000 psi. Steel. Old part #47250.

Joins at right angles a hose with a #4 JIC male fitting to one with a #4 JIC female swivel fitting. Steel. Working Pressure: 5,000 psi. Old part #47160.

Converts at a right angle, a hose with a # 4 JIC male to 1/4" NPT female. Steel. Working Pressure: 5,000 psi. Old part #47200.

Converts at a right angle, a hose with a # 4 JIC male to 1/4" NPT male. Steel. Working Pressure: 5,000 psi. Old part #47180.

Converts a 1/4" tube at a right angle to 1/4 NPT female. Steel. Working Pressure: 5,100 psi. This working pressure is based on the use of this fitting with 316 stainless steel, seamless tubing that is 1/4" outside diameter with a 0.035" wall thickness. Old part #47360.

Converts a 1/4" tube at a right angle to 1/4 NPT male. Steel. Working Pressure: 5,100 psi. This working pressure is based on the use of this fitting with 316 stainless steel, seamless tubing that is 1/4" outside diameter with a 0.035" wall thickness. Old part #47350.

Joins two 1/4" tubes in a straight run with a female 1/4 NPT port on the third leg. Steel. Working Pressure: 5,100 psi. This working pressure is based on the use of this fitting with 316 stainless steel, seamless tubing that is 1/4" outside diameter with a 0.035" wall thickness. Old part #47340.

Cross with four female 1/4 NPT outlets. Working Pressure: 5,000 psi. Steel. Old part #47270.