A rectangular, chrome-plated brass block with an O-ring sealed regulator port, identical to that on a scuba tank valve. Gas inlet port in the bottom of the block is ported female 1/4" NPT. Used for special adaptations and TEK rigs. 3,200 psi service. Delivered Oxy-Clean.

A handy jump adapter for filling a SCBA (firefighter, medical emergency unit) with a standard scuba filling whip. Has a handtite wheel and teflon-seal nipple, so no wrench is needed. CGA346 (3,000 psi) for MSA, Scott, Survivair, etc. tanks. (Replacement tip seal: Order #45001)

Seal for SCUBA to SCBA Adapter (45000)

Sometimes called a cross over. This device is used to equalize pressure between two scuba tanks with DIN-type valves. Global produces all air service equalizers using our exclusive high pressure certified thermoplastic hose rated for 6,000 psi working pressure and 20,000 psi burst. Each equalizer has a 2 foot long, 1/4" ID hose and internal bleeder screw on a chrome plated brass bleeder block included as standard. Air service only. Service to 4,500 psi. Order #56140OX for O2/Nitrox...

The chromed-brass features a male 300 Bar DIN fitting used on many scuba filling apparatus. In-line air entry, 1/4" NPTF port. 4,500 psi service. Air service only. Order #45183OX for O2/Nitrox version.

Designed for filling tanks with a DIN connection. Global produces all scuba filler whips using our exclusive high pressure certified thermoplastic hose rated for 6,000 psi working pressure and 20,000 psi burst. Each filler whip has a 5 foot long, 1/4" ID hose with 1/4" NPT male end, line valve and bleeder screw on a chrome plated right angle brass bleeder block included as standard. 4,500 psi service. Air service only. Order #45158 for right angle version.

The chromed-brass features a male 300 Bar DIN fitting used on many scuba filling apparatus. In-line air entry, 1/4" NPTF port. 4,500 psi service. Delivered oxy clean.

Used to check the pressure in tanks with 300 Bar DIN type valves. Vinyl covered, plastic-cased 5,000 psi gauge and is intended largely for moderate indoor-outdoor applications. All Global tank checkers come with an integrated bleeder. Service to 4,500 psi. Air service only. Order #57235OX for O2/Nitrox version.

Sometimes called a cross over. This device is used to equalize pressure between two scuba tanks with DIN-type valves. This equalizer is constructed with an 18 inch stainless steel braided, Teflon core hose rated for 5,000 psi working pressure and 20,000 psi burst. Each equalizer has an internal bleeder screw on a chrome plated brass bleeder block included as standard. Service to 4,500 psi. Delivered oxy clean. Old Part #45345OX.

Used to check the pressure in tanks with 300 Bar DIN type valves for Nitrox / Oxygen applications. Deluxe Rubber covered, 5,000 psi gauge and is intended largely for moderate indoor-outdoor applications. Service to 4,500 psi. All Global tank checkers come with an integrated bleeder. Delivered Oxy Clean.

Used to check the pressure in tanks with Scuba yoke type valves for Nitrox / Oxygen applications. Deluxe Rubber covered, 5,000 psi gauge and is intended largely for moderate indoor-outdoor applications. Service to 3,200 psi. All Global tank checkers come with an integrated bleeder. Delivered Oxy Clean.

Sometimes called a cross over. This device is used to equalize pressure between two scuba tanks with Yoke-type valves. This equalizer is constructed with an 2 foot stainless steel braided, Teflon core hose rated for 3,000 psi working pressure and 12,000 psi burst. Each equalizer has an internal bleeder screw on a chrome plated brass bleeder block included as standard. Service to 3,000 psi. Delivered oxy clean. Old Part #45340OX.