A 6,000 psi duty 316 Stainless Steel valve with two inlet and one outlet port. Gas from either inlet line can be exclusively ported into the outlet.1/4 NPT connections on inlet and outlet ports. Used in air stations or distribution panels. Order #46291 for rebuild kit.

An excellent brass, air control valve for compressor lines, scuba fill whips, or air distribution panels. Only 1/4 turn is required to open valve, but precise control can still be maintained. Unlike most valves, air can flow either way through the orifice without harming it. A real time-saver on fill whips. 1/4" FNPT ports. 3,000 psi working pressure. Can be panel mounted through a 0.77" hole in a panel no more than 1/4" thick. Very easy to rebuild: Order rebuild kit #46183 for Parker valve or...

An excellent stainless steel air control valve for compressor lines, scuba fill whips, or air distribution panels. Only 1/4 turn is required to open valve, but precise control can still be maintained. Unlike most valves, air can flow either way through the orifice without harming it. A real time-saver on fill whips. 1/4" FNPT ports. 6,000 psi working pressure. Can be panel mounted through a 0.77" hole in a panel no more than 1/4" thick. Very easy to rebuild: Order rebuild kit #46171 for Parker...

Bonnet and Stem for GV valves CGA346, CGA580 & CGA540 only. Includes bonnet and stem only.

Bonnet and Stem for GV valves CGA 347 and CGA 702 only. Includes bonnet and stem only.

A brass pigtail with a CGA 346 nut and tailpiece assembly at each end that connects to either a CGA 346 manifold tee or storage valve. For air to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve, thereby providing two extra CGA outlets...

Cap to seal #4 JIC male fitting. Stainless steel. Working Pressure: 7,500 psi.

This valve has a 3/4-14 NGT inlet thread which is common to most cascade bottles. Outlet is a CGA #346 (Breathing Air) with a working pressure of 3,000 psi. Be sure to select the proper burst disc pressure to match the DOT cylinder this valve this to by used on. This is a GV series valve. For full rebuild kits, order #46136. For replacement Bonnet and Stem only order #46135VS-GV. For replacement seat plug only order #4615SP-GV.

This valve has a 3/4-14 NGT inlet thread which is common to most cascade bottles. Outlet is a CGA #347 (High Pressure Breathing Air) with a working pressure of 4,700 psi. Be sure to select the proper burst disc pressure to match the DOT cylinder this valve is to be used on. This is a GV series valve. For full rebuild kits, order #46137. For replacement Bonnet and Stem only order #46135VS-GV347. For replacement seat plug only order #4615SP-GV.

This valve has an oversize 3/4-24 NGT inlet thread . Outlet is a CGA #347 (High Pressure Breathing Air) with a working pressure of 4,700 psi. Be sure to select the proper burst disc pressure to match the DOT cylinder this valve is to be used on. This is a GV series valve. For full rebuild kits, order #46137. For replacement Bonnet and Stem only order #46135VS-GV347. For replacement seat plug only order #4615SP-GV.

This valve has a 3/4-14 NGT inlet thread which is common to most cascade bottles. Outlet is a CGA #540 (Oxygen) with a working pressure of 3,000 psi. Be sure to select the proper burst disc pressure to match the DOT cylinder this valve is to be used on. This is a GV series valve. For full rebuild kits, order #46136OX. For replacement Bonnet and Stem only order #46135VS-GV. For replacement seat plug only order #4615SP-GV.

This valve has a 3/4-14 NGT inlet thread which is common to most cascade bottles. Outlet is a CGA #580 (Inert gas - Helium/Argon) with a working pressure of 3,000 psi. Be sure to select the proper burst disc pressure to match the DOT cylinder this valve this to by used on. This is a GV series valve. For full rebuild kits, order #46136OX. For replacement Bonnet and Stem only order #46135VS-GV. For replacement seat plug only order #4615SP-GV.