Right angle fitting; both ends are 1/4 NT female. Working Pressure: 3,300 psi. Brass. Old part #47302.

Right angle fitting; both ends are 1/4 NT female. Working Pressure: 6,600 psi. Stainless Steel. Old part #47301.

Right angle fitting; both ends are 1/4 NT female. Working Pressure: 5,000 psi. Steel. Old part #47300.

High pressure tee with three female 1/4" NPT outlets. Working Pressure: 3,300 psi. Brass. Old part #47262.

High pressure tee with three female 1/4" NPT outlets. Working Pressure: 6,600 psi. Stainless Steel. Old part #47261.

High pressure tee with three female 1/4" NPT outlets. Working Pressure: 5,000 psi. Steel. Old part #47260.

This small safety device that can arrest the air flow in lines or systems (such as scuba filling whips) if that apparatus should fail (hose rupture, O-ring failure, etc.) The flow is reduced to approximately 10%, so personnel can shut down the system with minimal risk and air loss. Flow restriction is adjustable but comes factory preset to approx. 80 SCFM at 5,000 psi and 55 SCFM at 2,500 psi. 1/4 NPT female inlet with 1/4 NPT male outlet. 6,000 psi working pressure.

When placed in-line with any gauge, this brass device prevents surging and oscillation of the gauge needle caused by compressors and booster pumps in some applications. Works for either flow directions and has 1/4 NPT male and female ports. 5,000 psi working pressure.

This gauge is commonly used to read a regulator's first stage intermediate pressure and has a range of 0-300 psi. 1/4" NPT male center back connection. Utilizes a stainless steel case. All wetted parts are stainless steel. Panel mounting requires only a 2.5" hole and does not require flange screws. A u-clamp holds the gauge secure in the panel. A good, general purpose gauge that has many applications. Accuracy is +/- 2.5% full scale.

This gauge is commonly used to read a regulator's first stage intermediate pressure and has a range of 0-300 psi. 1/4" NPT male lower stem mount connection. Utilizes a stainless steel case. All wetted parts are copper alloy. A good, general purpose gauge that has many applications. Accuracy is +/- 2.5% full scale.

Reads 0-5,000 psi. 1/4" NPT male center back connection. Utilizes a stainless steel case. All wetted parts are stainless steel. Panel mounting requires only a 2.5" hole and does not require flange screws. A u-clamp holds the gauge secure in the panel. A good, general purpose gauge that has many applications. Accuracy is +/- 2.5% full scale. Order #46005 for 300 psi.

This gauge has a range of 0-5,000 psi. 1/4" NPT male lower stem mount connection. Utilizes a stainless steel case. All wetted parts are copper alloy. A good, general purpose gauge that has many applications. Accuracy is +/- 2.5% full scale.#46020 for 300 psi.#46085 for 6,000 psi.#46086 for 7,500 psi.#46087 for 350 Bar.