This modular apparatus can control and distribute high pressure scuba air from your compressor to and from storage cylinders as well as into scuba tanks as required. Rated for 5,000 psi service, it consists of a heavy brass manifold bar containing three ball valves to control and direct air flow. Ball valves require no directional flow; thus they can control air-flow into our out of an air storage bank without being damaged. Therefore, this unit can control air from three individual storage...

A heavy-duty block machined from 1.5" hexagonal brass bar stock. Has 10 interconnected, 1/4" NPTF outlet ports: 4 on top, 4 on bottom (120 degrees offset), and one at each end. Chrome-plated for an attractive, durable finish. For mounting, each bar has two 1/4-20 bolt holes on the underside which can be used for direct mounting or with the #45217 mounting bracket. Use this manifold to control or distribute air to and from your compressor and storage banks. Also, useful for tank charging where...

This anodized aluminum block measuring 1" x 4.5" x 2" has five 1/4 NPT female ports: 1 on each end, 1 on the top, and 2 on the bottom. Four small holes through the body permit easy mounting with bolts/screws. 5,000 psi service. Air service only.

A heavy-duty block machined from 1.5" hexagonal brass bar stock. Has 6 interconnected, 1/4" NPTF outlet ports: 2 on top, 2 on bottom (120 degrees offset), and one at each end. Chrome-plated for an attractive, durable finish. For mounting, each bar has two 1/4-20 bolt holes on the underside which can be used for direct mounting or with the #45217 mounting bracket. Use this manifold to control or distribute air to and from your compressor and storage banks. Also, useful for tank charging where...

Anodized aluminum block #45380 measuring 1" x 11" x 2" but with seven 1/4 NPT female ports: 1 on each end, 1 on the top, and 4 on the bottom. Four small holes through the body permit easy mounting with bolts/screws. 5,000 psi service. Air service only.