In-Line 2nd Stage Adjusting Tool / Spade Tip

This device allows thorough internal washing of tumbled / dirty dive tanks with a minimum of handling. Consists of a modified tank stand (8.25" ID) with an adjustable, perforated metal tube which slips into any inverted tank placed in the stand; the tube can be connected to a water faucet by means of a short hose. Just set this entire assembly over a drain, attach the hose, turn on the water, and the internal sprinkler will flush the tank clean in a few minutes.

Global's VIP light has been totally redesigned for 2010. The miniature bulb system has been replaced with an extremely bright LED array that emits essentially "cold light." This eliminates common problems with overheating, tube melting, or premature bulb failures that have plagued all incandescent models. A transformer reduces household voltage to 12v for safety. The LED array is aligned down one side of a narrow strip, so light intensity can be adjusted by simply rotating the wand. This light...

O2 Safe Thread Grease For: Regulator Rebuilds, 1st and 2nd stages, Tank valves, and O-rings. Formulated for Wet Conditions. 100 gram jar.

O2 Safe Thread grease For: Regulator Rebuilds, 1st and 2nd stages, Tank valves, and O-rings. Formulated for Wet Conditions. 100 gram plunger.

Similar to LOX-8 paste, except in a thinner formulation. LOX-8 grease is an oxygen compatible PTFE grease suitable for 1st and 2nd stage regulator rebuilds, tank valves and O-rings in a 25 gram jar. Order 42148OX for 100 gram jar, 42149OX for 100 gram plunger.

Various components of common scuba equipment such as DIN-fittings and regulator second stage inlets require thread sealants, but Locktites ARE NOT O2 compatible. Instead, LOX-8 paste can be substituted to mildly freeze such threaded components. This greenish colored fluorocarbon is fully O2 compatible. 100 gm. jar.

Various components of common scuba equipment such as DIN-fittings and regulator second stage inlets require thread sealants, but Locktites ARE NOT O2 compatible. Instead, LOX-8 paste can be substituted to mildly freeze such threaded components. This greenish colored fluorocarbon is fully O2 compatible. 100 gm plunger.

Various components of common scuba equipment such as DIN-fittings and regulator second stage inlets require thread sealants, but Locktites ARE NOT O2 compatible. Instead, LOX-8 paste can be substituted to mildly freeze such threaded components. This greenish colored fluorocarbon is fully O2 compatible. 25 gram jar. Order 42145OX for 100 gram jar; 42146OX for 100 gram plunger.

Set of 4 robust probes with screw-driver style plastic handles. Each probe has a unique shaped tip useful for probing/removing large O-rings, gaskets, or valve seats.

Plastic retainer strap for mouthpieces. Has a stainless steel tooth clamp which meets mil-specs for dive gear. Use to clamp mouthpieces, buoyancy device hoses, and accessory devices. 100 / bundle. BLACK

Plastic retainer strap for mouthpieces. Has a stainless steel tooth clamp which meets mil-specs for dive gear. Use to clamp mouthpieces, buoyancy device hoses, and accessory devices. 100 / bundle WHITE