A metal plug with a 7/8"-14 thread and O-ring seal. Used to plug Genesis and other DIN tanks during tumbling.

Beads are 4-5 mm clear glass balls which are employed whenever minimal cutting activity is required such as during oxy-cleaning for Nitrox usage or for removal of persistent internal tank odors. Will not remove heavy, gross contaminants. About 10 pounds are generally required per tank.

For Global Tank Dryer; adjustable heat to 750* F; replaces discontinued 500* model #42033.

Heavy-Duty Bush - without Rod Special, small stainless brushes for removing those stubborn deposits on the very bottom of dive tanks. Each brush screws onto a 3-foot aluminum rod which fits into any 3/8 electric drill. Each unit comes with the brush and a plastic guide sleeve to augment insertion through tank necks.

This device allows thorough internal washing of tumbled / dirty dive tanks with a minimum of handling. Consists of a modified tank stand (8.25" ID) with an adjustable, perforated metal tube which slips into any inverted tank placed in the stand; the tube can be connected to a water faucet by means of a short hose. Just set this entire assembly over a drain, attach the hose, turn on the water, and the internal sprinkler will flush the tank clean in a few minutes.

Global's VIP light has been totally redesigned for 2010. The miniature bulb system has been replaced with an extremely bright LED array that emits essentially "cold light." This eliminates common problems with overheating, tube melting, or premature bulb failures that have plagued all incandescent models. A transformer reduces household voltage to 12v for safety. The LED array is aligned down one side of a narrow strip, so light intensity can be adjusted by simply rotating the wand. This light...

A chrome-plated 1.5" hexagonal brass block with 6 machined grooves which can be used to estimate the depth of pits in dive tank walls. Slots ranging from 0.01" to 0.06" deep can be used as a reference after the depth of the pit has been probed.

A threaded, plastic plug with a centralized hole through which the rod of the whip can pass. The plugs thread matches that of 3/4" NPS tanks and, when screwed into place, controls the angle of the whip to prevent damage to the strands while still achieving proper cleaning.

Whip for pony or other small tanks. An essential device for LIGHT-DUTY cleaning inside scuba tanks when tumbling is not needed, but deposits like flash rust or aluminum Bayerite should be removed. Minor contaminants in large cylinders which will not fit the tumbler machine can also be whipped out. The whip is a flexible "broom" consisting of strands of a space-age plastic coated with a durable abrasive and crimped onto an aluminum rod. The whip can be spun by any 3/8-electric drill. NOTE: To...

A sturdy 3-legged steel frame holds all common size SCUBA cylinders in an inverted position so that after tumbling, media and cleaner can be drained from them into a receptacle. The stand will hold tanks up to 8.25 in diameter.

A plastic, O-ring sealed plug for sealing common 3/4"-14 tank threads during tumbling.

Whip for standard scuba tanks. An essential device for LIGHT-DUTY cleaning inside scuba tanks when tumbling is not needed, but deposits like flash rust or aluminum Bayerite should be removed. Minor contaminants in large cylinders which will not fit the tumbler machine can also be whipped out. The whip is a flexible "broom" consisting of strands of a space-age plastic coated with a durable abrasive and crimped onto an aluminum rod. The whip can be spun by any 3/8-electric drill. NOTE: To...