This apparatus can hold two dive tanks in an inverted position so that they can be dried after tumbling by forced hot air. Includes two tank stands, an air delivery pipe with two outlet ports, and an industrial-grade heat gun. The latter is 115-volt, 10-amp unit with an adjustable 750* F heat element suitable for drying all scuba tanks. One outlet vent on the air manifold is interchangeable into a smaller diameter pipe for drying older steel cylinders with 1/2" - NGT openings. NOTE: Care must...

Tank Dryer System W/OUT Heat Gun

A 7/8" diameter magnifying mirror with handle used to inspect the inner neck of aluminum tanks for cracks or imperfections. A procedure which is now a standard part of the yearly VIP. A ball joint between the mirror and handle allows the viewing angle to be adjusted.

Just the tool to remove congested media from a dive tank after tumbling. Snap this air gun onto any pressurized BC hose, place the curved tube nozzle into the neck of the tank, which is inverted over a catch pan, and inject a stream of air. The internal pressure created will quickly jet a slurry of liquid and media into the pan, emptying the cylinder in seconds.

This machine consists of two heavy gauge, dichrome-plated steel end plates that support three parallel rubber rollers, the center one of which is rotated by a 60 rpm, 1/4-hp gearmotor. This apparatus allows two dive cylinders to be simultaneously tumbled at about 25 rpm. The semi-soft rollers will not deface or mark tanks, but still have excellent traction. The spacing between each roller axis is adjustable so tanks of different diameters can be accommodated. The parallel side rollers are...

Tank Tumbler without Gearmotor.

Constructed of heavy, welded steel plates which have been zinc plated, this V-shaped vise can be bench-mounted in either vertical or horizontal position. Tanks up to 8.5" in diameter are secured in the device with an adjustable chain vise-grip. A plastic tube to cover and pad the chain is also included.

A quick and easy upgrade to turn your 42020 tank draining stand into a tank washer. Mounts easily with 4 stainless steel bolts. Firmly grabs the tank stand with 4 vinyl coated clamps. Tank draining stand not included.

A 3-foot aluminum rod which screws onto the tank whip and lengthens it to about 70".

A fine, sand like abrasive grit which speeds the cleaning activity of normal media in STEEL tanks and usually shortens the tumbling process by several hours. Also enhances the cleaning of very dirty tanks with pitted or concreted walls. Requires only 2-3 teaspoons of grit per tumble. Sold by the pound.