When a larger face and higher accuracy are required, this 4" gauge surpasses its 2 1/2" counterparts. It has a range of 0-5,000 psi. 1/4" NPT male lower stem mount connection. Utilizes a stainless steel case. All wetted parts are copper alloy. Accuracy is +/- 1.0% full scale.

This gauge has a range of 0-6,000 psi. 1/4" NPT male lower stem mount connection. Utilizes a stainless steel case. All wetted parts are copper alloy. A good, general purpose gauge that has many applications. Accuracy is +/- 2.5% full scale.

This gauge has a range of 0-7,500 psi. 1/4" NPT male lower stem mount connection. Utilizes a stainless steel case. All wetted parts are copper alloy. A good, general purpose gauge that has many applications. Accuracy is +/- 2.5% full scale.

This gauge is commonly used to read a regulator's first stage intermediate pressure and has a range of 0-300 psi. 1/4" NPT male lower stem mount connection. Housed in an ABS plastic body with copper wetted parts. A red vinyl cover is included for added protection. Accuracy is +/- 3% full scale.

This gauge has a range of 0-5,000 psi. 1/4" NPT male lower stem mount connection. Housed in an ABS plastic body with copper wetted parts. A red vinyl cover is included for added protection. Accuracy is +/- 3% full scale. Order #46015 for 300 psi.

A 2.5" sealed stainless case is filled with oil to protect the mechanism from environmental and physical hazards like salt water, knocks, and vibrations! The oil provides a mechanical effect similar to that of a snubber. A very popular gauge for use on boosters and other pulsating devices. 1/4" NPT male lower stem mount connection. Utilizes a stainless steel case. All wetted parts are copper alloy. Accuracy is +/- 2.5% full scale.

A 2.5" sealed stainless case is filled with oil to protect the mechanism from environmental and physical hazards like salt water, knocks, and vibrations! The oil provides a mechanical effect similar to that of a snubber. A very popular gauge for use on boosters and other pulsating devices. 1/4" NPT male lower stem mount connection. Utilizes a stainless steel case. All wetted parts are copper alloy. Accuracy is +/- 2.5% full scale.

A 4.5" dial reads 0-300 psi and an overall size of just over 6" make this gauge a must for workstations and panels. An accuracy of +/- 0.5% full scale combined with the large dial make for quick, accurate intermediate pressure readings or other low pressure tests. Designed for recessed panel mounting by three screws / bolts through edge flange. A removable dial cover hides the mounting screws creating a clean, sleek look. Body and housing are aluminum with stainless steel wetted parts....

A 4.5" dial reads 0-5,000 psi and an overall size of just over 6" make this gauge a must for workstations and panels. An accuracy of +/- 0.5% full scale combined with the large dial make for quick, accurate pressure readings for all types of high pressures. Designed for recessed panel mounting by three screws / bolts through edge flange. A removable dial cover hides the mounting screws creating a clean, sleek look. Body and housing are aluminum with stainless steel wetted parts. Connections...

A 2" gauge reads 0-5,000 psi and is housed in an ABS plastic body with copper alloy wetted parts. This unit is for general testing applications as well as Paintball devices, where 1/8 NPT connections are common. Accuracy is +/- 3% full scale. 1/8" NPT male center back mount connection.

A 2" gauge reads 0-5,000 psi and is housed in an ABS plastic body with copper alloy wetted parts. This unit for general testing applications as well as Paintball devices, where 1/8 NPT connections are common. Accuracy is +/- 3% full scale. 1/8" NPT male bottom stem mount connection.

CGA 346 handtite nut with plastic overmolded handwheel and tailpiece. Has no internal filter for breathing air to 3,000 psi. Order #45001 for replacement seal. Connects to a CGA 346 valve on a storage bottle with a male 1/4 NPT connection opposite.