A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. The control knob has a 10-24 tapped hole. This allows the knob to be attached to a tether preventing loss or damage. Ports are 1/4 NPT male & female. 6,000 psi duty. Order #45086 for replacement seat. Provided oxy-clean.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. Ports are 1/4 NPT male. 6,000 psi duty. Order #45086 for replacement seat. This part can be ordered Oxy-clean. See 46232OX for Oxy-clean version. Previous Oxy-clean version of this part went by part #45367OX.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. Ports are 1/4 NPT male. 6,000 psi duty. Order #45086 for replacement seat. Provided oxy-clean.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. The control knob has a 10-24 tapped hole. This allows the knob to be attached to a tether preventing loss or damage. Ports are 1/4 NPT male. 6,000 psi duty. Order #45086 for replacement seat.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. The control knob has a 10-24 tapped hole. This allows the knob to be attached to a tether preventing loss or damage. Ports are 1/4 NPT male. 6,000 psi duty. Order #45086 for replacement seat. Provided oxy-clean.

A brass manifold tee that connects to a CGA 580 storage valve and allows the connection of a CGA 580 pigtail or nut and tailpiece to each side. Delivered Oxy-clean for inert gas (Helium / Argon) service to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to...

A brass pigtail with a CGA 580 nut and tailpiece assembly at each end that connects to either a CGA 580 manifold tee or storage valve. Delivered Oxy-clean for inert gas (Helium / Argon) service to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA...

The most popular and rugged valve available for controlling directional air flow in compressor lines or scuba filler whips. Uses same internal parts as many scuba valves. Chrome brass body for 6,000 psi service. Air flows from the 1/4 NPT female input to the 1/4 NPT male output. Can be panel mounted through a 1" hole. Order #46332 for rebuild kit. Order #46331OX for O2/Nitrox version. ...

The most popular and rugged valve available for controlling directional air flow in compressor lines or scuba filler whips. Uses same internal parts as many scuba valves. Chrome brass body for 6,000 psi service. Air flows from the 1/4 NPT female input to the 1/4 NPT male output. Can be panel mounted through a 1" hole. Order #46332OX for rebuild kit. This Oxy-clean version incorporates a Kel-F seat. Order #46332OX for rebuild kit. Previous Oxy-clean version of this part went by part #45334OX. ...

The most popular and rugged valve available for controlling directional air flow in compressor lines or scuba filler whips. Uses same internal parts as many scuba valves. Chrome brass body for 6,000 psi service. Air flows from the 1/4 NPT female input to the 1/4 NPT male output. Order #46332 for rebuild kit. Order #46330OX for O2/Nitrox version.

The most popular and rugged valve available for controlling directional air flow in compressor lines or scuba filler whips. Uses same internal parts as many scuba valves. Chrome brass body for 6,000 psi service. Air flows from the 1/4 NPT female input to the 1/4 NPT male output. This Oxy-clean version incorporates a Kel-F seat. Order #46332OX for rebuild kit. Previous Oxy-clean version of this part went by part #45333OX.

Male Adapter Nipple, 1/4 NPT male x 1/8 NPT male. Brass. Working Pressure: 4,000 psi.