Male Adapter Nipple, 1/4 NPT male x 1/8 NPT male. Brass. Working Pressure: 4,000 psi.

Male Adapter Nipple, 1/4 NPT male x 1/8 NPT male. Stainless Steel. Working Pressure: 8,000 psi.

Male Adapter Nipple, 1/4 NPT male x 1/8 NPT male. Steel. Working Pressure: 6,000 psi.

Two in-line female 1/4 NPT ports with a 1/4 NPT male at a right angle. Working Pressure: 3,300psi. Brass. Old part #47322.

Two in-line female 1/4 NPT ports with a 1/4 NPT male at a right angle. Working Pressure: 6,600 psi. Stainless Steel. Old part #47321.

Two in-line female 1/4 NPT ports with a 1/4 NPT male at a right angle. Working Pressure: 5,000 psi. Steel. Old part #47320.

Right angle fitting; both ends are 1/4 NPT male. Working Pressure: 4,000 psi. Brass. Old part #47292.

Right angle fitting; both ends are 1/4 NPT male. Working Pressure: 8,000 psi. Stainless Steel. Old part #47291.

Right angle fitting; both ends are 1/4 NPT male. Working Pressure: 6,000 psi. Steel. Old part #47290.

A heavy-duty block machined from 1.5" hexagonal brass bar stock. Has 10 interconnected, 1/4" NPTF outlet ports: 4 on top, 4 on bottom (120 degrees offset), and one at each end. Chrome-plated for an attractive, durable finish. For mounting, each bar has two 1/4-20 bolt holes on the underside which can be used for direct mounting or with the #45217 mounting bracket. Use this manifold to control or distribute air to and from your compressor and storage banks. Also, useful for tank charging where...

This anodized aluminum block measuring 1" x 4.5" x 2" has five 1/4 NPT female ports: 1 on each end, 1 on the top, and 2 on the bottom. Four small holes through the body permit easy mounting with bolts/screws. 5,000 psi service. Air service only.

A heavy-duty block machined from 1.5" hexagonal brass bar stock. Has 6 interconnected, 1/4" NPTF outlet ports: 2 on top, 2 on bottom (120 degrees offset), and one at each end. Chrome-plated for an attractive, durable finish. For mounting, each bar has two 1/4-20 bolt holes on the underside which can be used for direct mounting or with the #45217 mounting bracket. Use this manifold to control or distribute air to and from your compressor and storage banks. Also, useful for tank charging where...