A small, 2.0" hexagonal brass block with 7-ports; one dead center and one on each face of the hex. All ports are 1/4 NPT female. 3,000 psi service. Can be used as a compact junction point for gas supply hoses, filler whips, or for TEK diving applications. Delivered Oxy-clean.

A stainless steel bracket for wall-mounting Global 6 and 10 Port hex, brass manifolds. Engages the two 1/4 - 20 bolt holes on the bottom of the bar so that the assembly can be screwed or bolted to a wall or other retaining structure. Use on manifolds #45386, #45386OX, #45387 and #45387OX.

Replacement nut and compression sleeve for use with Global fittings. Steel. Brand specific - do not mix with other brands. Reusable Compression Fittings - Tubes must often be joined together or adapted to other system components. Compression fittings employ a nut and ferrule which crimp onto the tube forming a detachable union that is stronger than the tube itself. Some fittings also adapt the tube to a 1/4" pipe thread (NPT). Additional Info: Global offers a wide selection of high pressure...

Replacement nut and compression sleeve for use with Global fittings. Stainless. Brand-specific/do not intermix with other brands. Reusable Compression Fittings - Tubes must often be joined together or adapted to other system components. Compression fittings employ a nut and ferrule which crimp onto the tube forming a detachable union that is stronger than the tube itself. Some fittings also adapt the tube to a 1/4" pipe thread (NPT). Additional Info: Global offers a wide selection of high...

A brass manifold tee that connects to a CGA 540 storage valve and allows the connection of a CGA 540 pigtail or nut and tailpiece to each side. Delivered Oxy-clean for oxygen service to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve,...

A brass pigtail with a CGA 540 nut and tailpiece assembly at each end that connects to either a CGA 540 manifold tee or CGA 540 storage valve. Provided Oxy-Clean for oxygen service to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve,...

Same as 5HP-24. All Air Station Hoses are built in house. Every hose has a working rating of 5,000 psi with a burst greater than 20,000 psi. 5HP hoses are 1/4" ID with a #4 FJIC swivel fitting on each end. Hose length in inches is OAL.

Standard male 1/4 NPT plug with hex head. Working Pressure: 3,200 psi. Brass. Old part #47222.

Standard male 1/4 NPT plug with hex head. Working Pressure: 6,500 psi. Stainless Steel. Old part #47221.

Standard male 1/4 NPT plug with hex head. Working Pressure: 6,000 psi. Steel. Old part #47220.

Rebuild Kit #46190, #46200 and #46222 - Brass Check Valve. To purchase a new check valve, see #46205, #46210, #46220 or #46225.

Rebuild Kit for Regulator #45115. Includes poppet cartridge, piston, vent seat and 3 o-rings.